TM 5-3610-253-14
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Flat Tip Screwdriver
5 mm Hex Head Key Wrench
Digital Multimeter
Extender Board
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a.
Turn off power.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
b.
Remove front and rear electronics enclosure covers.
c.
Remove safety bolt cover.
d.
Remove plug 44.
e.
Check for continuity across two wires on terminal block going to safety
bolt for 40 to 50 ohms.
f.
If 40 to 50 ohms is present, proceed to step h.
If 40 to 50 ohms is not present, replace safety bolt (paragraph
h.
Plug in plug 44 and reinstall safety bolt cover.
5-512
