TM 5-3610-253-14
Table 5-20. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
(Number) - Hundreds of Hours
AN - Annually
W - Weekly
B - Before
S
- Semiannually
M - Monthly
D - During
BI - Biennially
Q - Quarterly
A - After
ITEM TO BE INSPECTED
IN-
ITEM
TER-
NO.
PROCEDURE
VAL
PAPER CUTTER - Cont
1
M
Inspect Backgauge V-Belts - Cont
3.
Inspect V-belts for wear, cracking, or oil
deposits. Replace if defective.
4.
Check V-belts' deflection. Deflection should
be 6-9 mm (1/4 - 3/8 in.). If deflection
differs from specifications, adjust V-belts
by rotating spring tension bolt until
proper tension is received.
Reinstall backgauge motor V-belt cover.
5.
5-391
