TM 5-3610-253-14
Table 5-4. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
(Number) - Hundreds of Hours
AN - Annually
W - Weekly
B - Before
- Semiannually
S
M - Monthly
D - During
Q - Quarterly
BI - Biennially
A
After
For Readiness
ITEM TO BE INSPECTED
Reporting,
lN-
ITEM
Equipment Is
TER-
PROCEDURE
NO.
Not Ready/
VAL
Available If:
PAPER CUTTER - Cont
Inspect Cutting Buttons - Cont
B
4
Turn on power.
1.
(a)
Unlock the safety lock with operator key.
Turn main power switch to I position.
(b)
Press control power on switch.
(c)
WARNING
Be sure personnel and foreign materials
are clear of cutting and clamping area
before pressing the cutting buttons.
Death or serious injury may occur.
One cutting
2. Press cutting buttons separately, then together.
button acti-
vates cut.
NOTE
Only one cut should be performed if buttons
are pressed continually.
Multiple
Press both cutting buttons and hold.
3.
cuts are
performed
without re-
leasing cut-
ting but-
tons.
NOTE
Knife must stop at upper deadpoint and
cutting buttons must be released before
another cut can be performed.
5-41
