TM 5-3610-253-14
Table 54. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
AN - Annually
(Number) - Hundreds of Hours
W - Weekly
B - Before
- Semiannually
S
M - Monthly
D - During
BI - Biennially
Q - Quarterly
A - After
For Readiness
ITEM TO BE INSPECTED
IN-
Reporting,
ITEM
Equipment Is
TER-
PROCEDURE
NO.
Not Ready/
VAL
Available If:
1
Inspect Paper Cutter - Cont
B
Light oper-
Place table illumination switch to the right and
5.
ates incor-
check light for correct operation.
rectly.
Check cutting stick for damage or excessively
6.
deep grooves. Rotate or replace if worn or
damaged.
False clamp
Check false clamp for proper insertion in either
7.
is not
its holder under front of table or installed in
properly
clamp.
inserted.
8.
Turn off paper cutter.
(a) Turn main power switch to O position.
(b) Lock safety lock with operator key.
2
Clean Paper Cutter.
B
WARNING
Dry cleaning solvent, P-D-680, used to clean
parts, is potentially dangerous to personnel
and property. Avoid repeated and prolonged
skin contact. Wear solvent impermeable gloves
and eye/face protective equipment when using
solvent. Do not use near open flame or
excessive heat. Flashpoint of solvent is 100
to 138F (38 to 59C) .
Clean work surface with solvent-soaked cheese-
1.
cloth and coat with wax.
5-37
