TM 5-3610-253-14
Table 5-4. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
NOTE
If the equipment must be kept in continuous operation, check and service
only those items that can be checked and serviced without disturbing
operation. Make the complete checks and services when the equipment
can be shut down.
AN -Annually
W - Weekly
(Number)- Hundreds of Hours
B - Before
- Semiannually
S
M - Monthly
D - During
BI - Biennially
A - After-
Q - Quarterly
For Readiness
ITEM TO BE INSPECTED
Reporting,
lN-
ITEM
Equipment Is
TER-
PROCEDURE
NO.
Not Ready/
VAL
Available If:
PAPER CUTTER
Inspect Paper Cutter.
B
1
Knife is
Inspect knife for knicked, blunt or damaged
1.
damaged.
cutting edge.
Check for loose nuts, bolts, and screws on
2.
knife assembly. Tighten if loose.
Check glass rule for loose mountings. Tighten
3.
if loose. Clean scale with lens tissue and
cleaner.
5-35
