TM 5-2330-305-14
4.4.1.16 REPLACE EQUALIZER BUSHING.
TOOLS: Combination Wrench (1 1/2 in.)
Torque Wrench
Hammer (4 lb)
Long Punch (3/8 pt)
Socket (1 1/2 in.)
SUPPLIES: Equalizer Bushing
C A U T I O N
BE SURE CHASSIS IS PARKED ON LEVEL GROUND
AND IS UNHOOKED FROM TRUCK BEFORE PROCEED-
ING TO PREVENT PERSONNEL INJURY.
1. Extend chassis leveling jacks to raise chassis high enough to
relieve tension on qualizer bushing.
2. Disconnect shock absorber from axle.
3. Remove nut and washer which secures equalizer bolt.
4. Using a hammer and long punch, remove the equalizer bolt and
washer.
5. Remove two equalizer bushings.
.
6.
Install two new qualizer bushings.
7. Install the equalizer bolt and washer, and secure with nut and
washer.
Torque nut to 340 to 360 ft. lb. (46.9 to 49.7 Nm)
8. Retract chassis leveling jacks.
4-36