TM 9-4931-436-14&P
(2) Plug appropriately labeled end
(3) Replace cable ties.
of W4 into connector J4 on PWB A1 (9).
(4) Replace panel assembly (refer
(3) Replace cable ties.
(4) Replace panel assembly (refer
aae. Cable Assembly W2 Removal (fig.
aak. Cable Assembly W5 Removal (fig.
(1) Remove panel assembly (refer
(1) Remove panel assembly (refer
(2) Unplug W2 (68) connector J6
from PWB A2 (25).
(2) Unplug W5 (64) connector J11
(3) Cut cable ties to release
from PWB A2 (25).
cable assemblies.
(3) Unplug W5 connector J1 from
aaf. Cable Assembly W2 Replacement
PWB A4 (57).
(4) Cut cable ties to release
(11) Plug appropriately labeled end of
cable assemblies.
W2 (68) into connector J6 on PWB A2 (25).
aa1. Cable Assembly W5 Replacement
(2) Plug appropriately labeled end
of W2 into connector J2 on PWB A1 (9).
(1) Plug W5 (64) connector Jl into
(3) Replace cable ties.
PWB A4 (57).
(4) Replace panel assembly (refer
(2) Plug W5 connector Jll into PWB
A2 (25).
aag. Cable Assembly W3 Removal (fig.
(3) Replace cable ties.
(4) Replace panel assembly (refer
(1) Remove panel assembly (refer
aam. Cable Assembly W6 Removal (fig.
(2) Unplug W3 (75) connector J3
from PWB A1 (9).
(1) Remove panel assembly (refer
(3) Unplug W3 connector J7 from
PWB A2 (25).
(2) Unplug connector J12 from PWB
(4) Cut cable ties to release
A2 (25).
cable assemblies.
(3) Unplug connector J1 from PWB
aah. Cable Assembly W3 Replacement
A5 (57).
(4) Cut cable ties to release
(1) Plugappropriately labeled end of
cable assemblies.
W3 (75) into connector 57 on PWB A2 (25).
aan. Cable Assembly W6 Replacement
(2) Plug appropriately labeled end
of W3 into connector J3 on PWB A1 (9).
(1) Plug W6 (65) connector J1 into
(3) Replace cable ties.
(4) Replace panel assembly (refer
PWB A5.
(2) Plug W6 connector Jl2 into PWB
aai. Cable Assembly W4 Removal (fig.
A2 (25).
(3) Replace cable ties.
(4) Replace panel assembly (refer
(1) Remove panel assembly (refer
aao. Cable Assembly W7 Removal (fig.
(2) Unplug W4 (74) connector J4
from PWB Al (9).
(3) Unplug W4 connector J8 from
(1) Remove panel assembly (refer
PWB A2 (25).
(2) Unplug W7 (67) connector J1
(4) Cut cable ties to release cable
from PWB A6.
assemblies.
(3) Unplug W7 connector J9 from
aaj. Cable Assembly W4 Replacement
PWB A2 (25).
(1) Plug appropriately labeled end of
(4) Cut cable ties to release
cable assemblies.
W4 (74)into connector 18 and PWB A2 (25).
6-12
