TM 5-6675-328-14
i. Turn main circuit breaker OFF.
j. Turn individual lighting circuit breakers OFF.
k. Turn safety switch OFF.
l. Have power cable disconnected at supply end. Then disconnect power cable from power entry panel. Put cable in
storage box on chassis.
m. Disconnect telephone cables from power entry panel.
CAUTION
To prevent loss of rod or thread damage, do not allow ground rod to rotate and unscrew when removing
the slide hammer rode.
n. Remove ground rod with slide hammer, and put ground rods, couplings, and slide hammer inside section. Clean
threads on each ground rod before storing.
NOTE
Be certain exhaust fan and air vent doors are securely closed.
o. Reinspect section interior for loose equipment and close all vent doors.
p. Close section. Secure and lock all personnel doors and cargo door.
q. Be sure air conditioner/heater covers are down and secured.
r. Remove handrails from boarding ladders.
s. Remove boarding ladders and insert handrails into back of ladders.
t. Secure ladders to back of section.
u. Fully extend landing gear.
v. Retract leveling jacks.
w. Visually inspect section exterior to be sure all equipment and covers are secured.
1-37
