TM 5-6675-328-14
(5)
Enter section and check that safety switch, main circuit breaker, and all equipment power supply switches are
off.
WARNING
Death or serious injury may result from connecting power cable to section before grounding.
(6)
Remove ground rod, slide hammer, and ground cable from section.
NOTE
Apply a thin film of grease to threaded ends of rods before driving into ground. This will permit easy
disassembly upon removal from ground.
Bottom ground rod must be identified so that it will always be the first rod driven into the ground.
These instructions supplement TC 11-6, Grounding Techniques.
1-29
