TM 5-6675-328-14
9-16.6. Replace Door Hinge (Piano Hinge).
MOS:
41B, Topographic Instrument Repair Specialist or 83FJ6, Reproduction Equipment Repairer
TOOLS:
1/4 in. Electric Drill
5/32 in. Drill Bit
Pop Rivet Gun
SUPPLIES:
Storage Cabinet Hinge
5/32 in. Pop Rivets
8-32 x 1/2 in. Screws (4 required)
8-32 Nuts (4 required)
a.
Drill out rivets holding hinge to cabinet and remove hinge.
b.
Install new hinge and temporarily secure with four screws and nuts.
c.
Close and latch cabinet door and install 12 pop rivets.
d.
Remove temporarily installed screws and nuts and install remaining pop rivets.
9-16.7 Remove/Install Work Station Storage Cabinet Assemblies
MOS:
41B, Topographic Instrument Repair Specialist or 83FJ6, Reproduction Equipment Repairer
TOOLS:
Cross Tip Screwdriver
7/16 in. Combination Wrench
1/4 in. Drive Socket Set
SUPPLIES:
Tabletop
Frame
Storage Cabinet Assemblies
Panel
a.
Remove equipment from tabletop as necessary.
b.
Remove drawers/shelves.
c.
Remove bolts, washers, and nuts holding cabinet/drawer assemblies together.
9-13
