TM 5-6675-328-14
9-16.3. Replace Door Latch (Wall Storage Cabinet).
MOS:
41B, Topographic Instrument Repair Specialist or 83FJ6, Reproduction Equipment Repairer
TOOLS:
9/16 in. Combination Wrench
Flat Tip Screwdriver
SUPPLIES:
Handle-Type Latch
a.
Remove holding plate retaining nut.
b.
Remove holding plate and latch rods.
c.
Remove side latch plate.
d.
Remove handle retaining nut.
e.
Loosen setscrew and remove bushing from handle shaft.
f.
Remove handle retaining screws and remove handle.
g.
Install new handle and secure with screws.
h.
Reinstall bushing on handle shaft and tighten setscrew.
i.
Reinstall handle retaining nut.
j.
Reinstall side latch plate.
k.
Reinstall latch rod holding plate and latch rods.
l.
Reinstall holding plate retaining nut.
9-10
