TM 5-6675-328-14
5-8.3. Exposed Bearing Surfaces. Lubricate all exposed bearing surfaces of the bed.
5-8.4. Headstock Spindle. Lubricate the collet seat and the exposed rear end of the spindle.
5-8.5 Tailstock Spindle. Lubricate the outside diameter and the collet seat.
5-9. TROUBLESHOOTING PROCEDURES. There are no operator troubleshooting procedures assigned for this
equipment.
5-10. MAINTENANCE PROCEDURES. There are no operator maintenance procedures assigned for this equipment.
5-18
