TM 5-6675-328-14
3-16.4 Replace Drill Press.
MOS: 41B, Topographic Instrument Repair Specialist
TOOLS: 1/4 in. Drive Socket Set
7/16 in. Combination Wrench
a.
Unplug power cord.
b.
Remove nuts, washers, bolts, and lower shock mounts retaining drill press to cabinet top. Open cabinet to
remove two rear bolts.
c.
Remove drill press, stiffening plate, and upper shock mounts.
d.
Install upper shock mounts and stiffening plate.
e.
Install new drill press to cabinet top stiffening plate; secure with shock mounts, retaining bolts, nuts, and washers.
f. Plug in power cord and check for operation.
3-20
