TM 5-6675-328-14
a. Unplug power cord.
b. Loosen motor locking wheel and remove motor assembly from column.
c. Remove power switch to allow access to wires and screws holding power cord.
d. Loosen clamp screw and free power cord.
e. Tag and disconnect wires; remove power cord.
f. Connect power cord wires.
g. Position power cord under clamp and tighten clamp.
h. Reinstall power switch.
i. Reinstall motor assembly on column and tighten locking wheel.
j. Plug in power cord.
3-18
