TM 5-6675-328-14
3-16.1 Replace Power Switch.
MOS: 35E, Special Electronic Devices Repairer
TOOLS: 9/16 in. Combination Wrench
Soldering Iron
Diagonal Pliers
SUPPLIES: Power Switch
Heat Gun
Heat Shrink Tubing
Solder (Item 20, Appendix E)
WARNING
Death or serious injury may occur from electrical shock if the power cord is not unplugged
before servicing.
a. Unplug power cord.
b. Loosen motor locking wheel and remove motor assembly from column.
c. Remove nut, ON/OFF plate, and pull switch out of housing.
d. Tag and disconnect wires; remove switch from housing.
e. Connect wires to new switch.
f. Install switch in housing and secure with ON/OFF plate and nut.
g. Reinstall motor assembly on column and tighten locking wheel.
h. Plug in power cord.
3-16
