TM 5-6675-326-14
1-15.17 Repair Personnel Ladder - Continued
e. Remove securing cable by punching out rivet on ladder.
f .
Install new quick-release pin by mounting securing cable to ladder with rivet. Reinstall quick-release
pin in mounting bracket.
Section V. DIRECT/GENERAL SUPPORT MAINTENANCE
1-16 SPECIAL TOOLS: TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE); AND SUPPORT
EQUIPMENT.
1-16.1 For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment
(MTOE) applicable to your unit.
1-16.2 For special tools, TM DE, and support equipment, refer to TM5-6675-326-24P, Organizational, Direct Sup-
port, and General Support Maintenance Repair Parts and Special Tools List (Including Depot Maintenance Repair
Parts and Special Tools) and the Maintenance Allocation Chart (MAC) in appendix B of this manual.
1-16.3 Repair parts are listed and illustrated in the Repair Parts and Special Tools List (TM5-6675-326-24P) cov-
ering direct support and general support maintenance for this equipment.
1-17 DIRECT/GENERAL SUPPORT PREVENTIVE MAINTENANCE CHECKS AN SERVICES (PMCS).
There are no PMCS at the direct/general support levels for the direct support section (van).
1-18 DIRECT/GENERAL SUPPORT TROUBLESHOOTING.
1-18.1 General
1-18.1.1 The table lists the common malfunctions which you may find during the maintenance of the direct sup-
port section (van) or its components. You should perform the test/inspections and corrective actions in the order list-
ed. Troubleshooting procedures for AC/Heating unit are listed in TM 5-4120-367-14 and for the chassis, truck in TM
9-2320-281-34.
1-18.1.2 This manual cannot list all the malfunctions that may occur, nor all tests or inspections and corrective ac-
tions. If a malfunction is not listed or is not corrected by listed corrective actions, notify your supervisor.
1-62
Change 1
