TM5-6675-326-14
1-15.11 Replace Emergency Light Assembly - Continued
REMOVAL:
WARNING
ELECTRICAL SHOCK
Unplug emergency light power cord before
r e p l a c i n g.
Failure to do so may result
i n d e a t h o r s e r i o u s i n j u r y .
a .
Unplug power cord.
h .
Remove screws.
Remove cable clamp.
c .
Remove two screws from cover.
Remove cover.
d .
Remove screw and washer securing power cord to emergency
light assembly.
e .
Remove power cord.
f .
Remove two mounting screws.
g .
Remove defective emergency light assembly.
INSTALLATION:
a .
Install new emergency light assembly.
Secure with two
mounting screws.
b .
Reinstall power cord.
Secure with washer and screw to
emergency light assembly.
c .
R e i n s t a l l c o v e r.
Secure with two screws.
d .
Reinstall cable clamp.
Secure with screws.
e .
Plug in power cord.
1-55
