TM 5-6675-326-14
1-15.8 Replace Telephone Binding Post
PERSONNEL REQUIRED: 1 Special electronic devices repairer MOS 35E
TOOLS: No. 2 cross-tip screwdriver
1/4-in. flat-tip screwdriver
1/2-in. combination box and open end wrench
MATERIALS/PARTS: Telephone binding post assembly
REMOVAL:
a.
Remove four mounting screws. Remove cover and cover gasket.
b. Remove four plate mounting screws, Remove plate and gasket.
c.
Label wires. Remove nuts and wires from binding posts.
d. Remove defective binding posts.
INSTALLATION:
a.
Install new binding posts.
b. Reconnect wires, and secure with nuts. Remove labels.
c.
Reinstall gasket and plate. Secure with four mounting screws.
d. Reinstall cover gasket and cover. Secure with four mounting screws.
Change 1
1-51