TM5-6675-326-14
1-6.1 Assembly and Preparation for Use - Continued
(6)
(7)
Repeat for positions B and C on PHASE switch.
NOTE
If INCORRECT PHASE light comes on, voltage is not within 110 and 125 vac,
or frequency is not 60 * 1 Hz. There is an electrical problem at the power
source. Contact supervisor for correction.
Turn ON safety switch.
i.
Turn ON main circuit breaker.
j.
Turn ON circuits in the following order: individual light switches, curbside and roadside air condition-
ers/heaters (TM5-4120-367-14), and individual equipment switches.
k.
Connect telephone lines to corresponding telephone binding posts.
1.
Test blackout switches.
Under blackout conditions,
NOTE
be sure equipment that must continue operation
is plugged into receptacles not marked BLACKOUT.
m. Plug in emergency lights, and turn switch to READY.
n.
Deactivate air suspension with caution. (Refer to TM 9-2320-281-10, para 2-16h(4)(6).)
1-6.2 Preparation for Movement
a. Secure equipment in proper containers as specified in appropriate chapters.
1-24
Change 1
