TM5-6675-326-14
4-14.6 Replace Fuse Holder
PERSONNEL REQUIRED:
1 Topographic instrument repair specialist MOS 41B
TOOLS:
9 / 6 4 - i n c h f l a t - t i p s c r e w d r i v er
9/16-inch combination box and open end wrench
MATERIALS/PARTS: Fuse holder
REMOVAL:
a.
b.
c .
d.
e.
f .
WARNING
ELECTRICAL SHOCK
Unplug power cord before servicing the
zoom transfer scope.
Failure to do so
may result in death or serious injury.
Turn power OFF, and unplug power cord.
Unplug below-stage illuminator cord.
Remove fuse caps and fuses.
Remove six screws from cover on underside of crosspiece
assembly.
Move cover to allow access to fuse holder.
Tag and remove wires from fuse holder.
Remove lock nut and washer securing fuse holder to crosspiece
assembly.
Remove fuse holder.
4-42
