TM5-6675-326-14
4-14.7 Replace Illuminator Plug Receptacle - Continued
b.
U n p l u g i l l u m i n a t o r c o r d ( s ).
c.
Remove fuse caps and fuses, if necessary.
d.
Remove six screws from cover on underside of crosspiece
assembly.
e .
Remove three screws, securing outer plug receptacle to inner
plug receptacle.
f .
Remove two screws, washers, and nuts securing outer plug
receptacle to cover.
g.
Tag wires and remove from inner plug receptacle, by loosening
three screws.
INSTALLATION:
a .
Remove three screws securing new outer plug receptacle to new
inner plug receptacle.
b.
Connect wires to new inner plug receptacle and tighten three
screws.
Remove tags.
c .
Install new outer plug receptacle on cover, and secure with
two screws, washers, and nuts.
d.
Connect inner and outer plug receptacles and secure with three
screws.
e .
Reinstall cover on underside of crosspiece assembly, and
secure with six screws.
f .
Reinstall fuses and fuse caps, if removed.
g.
P l u g i n i l l u m i n a t o r c o r d ( s ) .
h .
Plug in power cord , and turn power ON.
4-44
