TM5-6675-326-14
2-19.4 Service Z-Axis - Continued
d .
e .
f .
g .
h .
i .
j .
Remove four capscrews, and lift off fast-feed drive assembly
housing.
CAUTION
To prevent damage to film, do not allow lubricant or
solvent to contact any surface other than that being
s e r v i c e d.
Clean exposed worm gear and worm with bearing cleaner.
Dry exposed worm gear and worm.
Lubricate worm and worm gear. Wipe off excess.
Reinstall fast-feed drive assembly. Secure with two screws.
capscrews.
Reinstall fast-feed bearing bracket. Secure with two screws.
Remove optics and move optical mount to lowest limit of
t r a v e l .
NOTE
Do not proceed unless collimation equipment is
available.
2-58