TM 5-6675-326-14
2-19.1 Adjust Light Grids - Continued
j.
Turn grid intensity control fully left.
k. Carefully turn screw in low level adjustment resistor until light output is 500 fl.
l. Recheck high intensity by turning grid intensity control fully right and readjust as required.
m.
Repeat procedure for other light grid. Adjust so that light grids are as equal as possible.
n. Turn main power switch OFF and set ON/OFF switch to OFF.
o.
Reinstall cover, and tighten screws.
2-54
Change 1