TM 5-6675-325-14
Table 2-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Number) . Hundreds of Hours
D - During
M - Monthly
s
- Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM
NO.
2
lN-
TER
VAL
B
ITEM TO BE INSPECTED
PROCEDURE
DRAFTING, SCRIBING/TRACING TABLE - Cont
Service - Cont
4.
Rotate table
is on top.
5. Tighten tilt
position.
top assembly until glass surface
lock to secure table top assembly in
CAUTION
Do not use abrasive cleaner
Do not use running water or
on cloth.
Use moist cloth.
will scratch glass surface.
cause equipment damage.
on glass surface.
excessive water
Abrasive cleaner
Excessive water can
6.
Wipe glass surface with cheesecloth moistened
in mild solution of detergent and water.
7. Wipe glass surface with dry cheesecloth to
remove streaks and smears.
8.
Swing cabinet assembly to its normal position
under table.
9.
Plug in power cord.
For Readiness
Reporting,
Equipment Is
Not Ready/
Available If:
Table top
does not
rotate.
2-10
