TM 5-6675-324-14
MOS: 35E, Special Electronic Devices Repairer
TOOLS: 3/16 in. Flat Tip Screwdriver
1/2 in. Box End Wrench
No. 2 Cross Tip Screwdriver
SUPPLIES:
Front Display PC Board
a.
Remove four screws and washers from top of auto-scaler. Lift off top.
CAUTION
Front panel is connected to frame of auto-scaler by two ribbon cables.
Do not pull front panel more than a few inches from frame. Damage to
circuit boards can result.
b.
Remove four screws on front panel of auto-scaler. Pull front panel free
from auto-scaler frame.
c.
Disconnect front panel ribbon cables J101 and J102 from main logic PC
board.
5-150
