TM 5-6675-324-14
c. Remove printed circuit board by pulling straight up out of inline socket.
d. Insert new printed circuit board into socket and push downward until properly seated.
e. Close top cover.
f. Plug in power cord.
4-16.9 Replace Blower Motor.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Cross Tip Screwdriver (6 in.)
Flat Tip Screwdriver (6 in.)
SUPPLIES: Blower Motor
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before
servicing the copy machine.
a. Unplug power cord.
4-79
Change 1
