TM 5-6675-324-14
b. Open and remove top cover.
c.
Loosen two lower screws and remove top screws at both ends of front
console. Lift and move console forward to expose control potentiometer
leads.
d. Tag and disconnect leads from exposure control potentiometer.
e.
Remove front console.
f.
Loosen two motor mounting screws.
Slide drive motor and mount toward rear of copy machine.
g.
h. Remove rubber drive belt from drive motor pulley.
i.
Disconnect drive motor supply lead connector.
Disconnect ground wire.
j.
k. Remove motor mount screws and drive motor assembly.
l.
Remove four mounting screws, washers, and defective motor from motor
mount.
Install new drive motor into motor mount and loosely secure with screws
m.
and washers.
NOTE
Belt may be reinstalled when placing assembly into copier, before it is
secured with mounting screws.
n.
Reinstall drive belt.
4-82