TM 5-6675-324-14
NOTE
Early model and later model dc controller PC boards are interchangeable.
Connect negative lead of multimeter to J211-6 or J211-10.
g.
h. Connect positive lead of multimeter to emitter (E) of Q220.
i.
Insert and hold down screwdriver in door switch and turn power switch to
1 (ON).
j. Adjust VR203 for meter indication of 12 V when platen is moving forward.
k. Turn power switch to O (OFF) and remove screwdriver from door switch.
1.
Remove cassette.
Remove multimeter leads and jumper wire.
m.
Reinstall dc controller cover.
n.
Close front door.
o.
3-137
