TM 5-6675-324-14
Turn power switch OFF and unplug power cord.
a.
b. Remove one screw from each of four clips. Loosen other screws.
Turn clips 90 to left or right.
c.
WARNING
Failure to do so may result in
Use care when handling damaged glass.
serious cuts.
d. Remove damaged glass surface.
CAUTION
Glass surface must be handled with care to avoid chipping or breaking.
Install new glass surface.
e.
Aline holes and reinstall screws.
f. Turn clips to secure glass surface.
Tighten all screws.
Plug in power cord and turn power switch ON.
g.
2-15
