TM 5-6675-324-14
Table 1-2. TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE
3.
BLACKOUT SWITCH DOES NOT OPERATE .
Step 1.
Check blackout switch position.
(a) If switch is ON, proceed to step 2.
(b) If switch is OFF, reset switch to BLACKOUT.
Step 2.
Check to see that striker plate contacts roller on microswitch.
(a) Loosen screws, and move plate up or down until microswitch
operates.
(b) If blackout switch still fails to operate, refer to
organizational maintenance.
