TM 5-6675-323-14
Section III OPERATOR MAINTENANCE
This equipment does not require lubrication.
LUBRICATION INSTRUCTIONS.
16-9. TROUBLESHOOTING PROCEDURES.
a.
T h e table lists the common malfunctions which you may find during the opea-
tion or maintenance of the vacuum cleaner. Y o u s h o u l d p e r f o r m t h e t e s t / i n s p e c t i o n s
and corrective actions in the order listed.
b. This manual cannot list all the possible malfunctions that may occur nor all
If a malfunction is not listed or is
test or inspections and corrective actions.
not corrected by a listed corrective action, notify your supervisor.
Table 16-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
VACUUM CLEANER MOTOR DOES NOT OPERATE.
1.
Step 1. Check power cord.
(a)
If plugged in, proceed to step 2.
(b)
Plug in power cord.
Step 2. Check position of power switch.
(a)
If turned on, proceed to step 3.
(b)
T u r n power switch on.
Step 3. Check circuit breaker position in circuit breaker box.
(a)
If turned off or tripped, turn circuit breaker on.
(b)
If turned on, refer to organizational maintenance.
