TM 5-6675-323-14
Section III OPERATOR MAINTENANCE
CAUTION
Unnecessary or improper attempts to lubricate the split-stage light table
will damage film, bearings, or internal components.
No lubrication is authorized at the operator's level. Maintenance procedures at
direct support level require limited lubrication of chains and precision bearings
when there is a reason to perform corrective action requiring the removal of compo-
nents.
a . T h e table lists the common malfunctions which you may find during operation
o r m a i n t e n a n c e o f t h e s p l i t - s t a g e l i g h t t a b l e , o r i t s c o m p o n e n t s . Y o u should
perform the test/inspections and corrective actions in the order listed.
b. This manual cannot list all the possible malfunctions that may occur, nor all
test/inspections and corrective actions.
If a malfunction is not listed or is not
corrected by a listed corrective action, notify your supervisor.
Table 6-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE
ACTION
FAN DOES NOT RUN. LIGHT GRIDS DO NOT WORK. CARRIAGE CLUTCHES DO NOT WORK.
1.
S t e p 1.
Check that power cord is plugged in.
(a) If plugged in, proceed to step 2.
(b) Plug power cord in correctly.
S t e p 2.
Check circuit breakers.
(a)
If circuit breakers
are
on,
refer
to
organizational
maintenance.
(b)
Reset
circuit
breakers.
