TM 5-6675-323-14
Table 3-13. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
PLOTTER IS TOTALLY INOPERATIVE. NO INDICATORS ARE LIT.
Step 1. Check to see if ac power plug is plugged into wall outlet.
(a)
If plotter is plugged in, proceed to step 2.
(b)
Insert plug into grounded ac outlet.
Step 2. Check t h a t e l e c t r i c a l o u t l e t i s o p e r a t i v e .
Insert
plug
into
different
outlet
or
reset
circuit
breaker.
(a)
(b)
If malfunction is not corrected, proceed to step 3.
Visually check for blown fuses.
Step 3.
Insert new fuse.
COMPUTER DISPLAYS ERROR MESSAGE.
PLOTTER STOPS.
2.
Refer to Table 3-12, Plotter Operation and Program Errors.
Correct program or repeat key sequence correctly.
COOLING FAN RUNS. EVERTHING ELSE IS INOPERATIVE.
3.
Press LINE power switch to off (0) and then to on (1).
3-111
