TM 5-6675-323-14
Table 3-9. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
AN - Annually
(Number) - Hundreds of Hours
W - Weekly
B - Before
S - Semiannully
D - During
M - Monthly
BI - Biennially
A - After
Q - Quarterly
For Readiness
ITEM TO BE INSPECTED
Reporting,
IN-
Equipment Is
ITEM TER.
PROCEDURE
Not Ready/
NO. VAL
Available If:
GRAPHICS PLOTTER - Cont
B
Inspect Plotter - Cont
1
4. Check that HP-IB Interface select code switch
is set to position 7.
Inspect platen area for dust or foreign particles.
5.
Clean as required.
W
Clean.
2
C h e c k that LINE power switch is off (0) and
1.
remove power cord from wall outlet.
2.
R e m o v e dust accumulation from surfaces of plotter
with soft-haired artist's brush.
D a m p e n cheesecloth with warm water and wring out
3.
excessive water.
WARNING
D e a t h or serious injury may occur from elec-
trical shock if plotter is energized with
platen wet.
3-54
