TM 5-6675-323-14
1-16.1 Replace Fluorescent Lamp Ballast.
MOS:
8 3 F J 6 , Reproduction Equipment Repairer
41B, Topographic Instrument Repair Specialist
Flat Tip Screwdriver
TOOLS:
1 / 4 in. Wrench
1/4 in. Drive Socket Set
Scribe
L a m p Ballast
SUPPLIES:
W i r e Ties
WARNING
Death or serious injury may occur unless overhead light circuit breaker
and main circuit breaker are turned off before working on light fixture.
Turn off overhead light, circuit breaker and main circuit breaker.
a.
Remove diffuser from light fixture.
b.
Remove safety tabs and lamps. Place in diffuser.
c.
Squeeze light wiring guard and remove.
d.
Remove wire ties as required.
e.
Tag wires from ballast for reference.
f.
Disconnect ballast wire from wire nut connection.
9"
Pry out lamp socket holder with flat tip screwdriver.
h.
Change 1
1-61
