TM 5-6675-321-14
d.
Remove screws and washers to release frame and gasket.
e.
Remove transparent cover.
f .
Remove screws and washers to remove level indicator.
g .
Replace level assembly and secure with screws and washers.
h.
R e i n s t a l l t r a n s p a r e n t c o v e r.
i .
Install new gasket.
j .
Reinstall frame and secure with screws and washers.
1-16.16 Replace Air Vent Screen.
MOS:
83FJ6, Reproduction Equipment Repairer
TOOLS:
Cross Tip Screwdriver
Scissors
SUPPLIES:
Rubber Adhesive (Item 1, Appendix E)
Screen, Nylon (Item 16, Appendix E)
a.
Raise access cover and remove screws holding screen frame to section.
Remove screen and frame.
c .
Clean all old screen material and adhesive from frame.
d.
Cut new screen material to size and attach to frame with adhesive.
e.
Reinstall frame to section and secure with screws. Lower cover.
1-79
b .
