TM 5-6675-319-14
a.
Unlock latch.
b.
Remove capscrews and washers from brackets. Remove brackets and shims.
c.
Remove defective latch assembly and latch rod.
d . I n s t a l l n e w l a t c h a s s e m b l y a n d l a t c h r o d.
e.
Reinstall shims, brackets, washers, and capscrews.
f. Check movement of latch rod and latch assembly. Lock latch.
1-20.3 Replace Personnel/Cargo Door Gasket.
MOS: 63W, Wheel Vehicle Repairer
TOOLS: Knife
SUPPLIES:
Vinyl Gasket
Adhesive (Item 3, Appendix E)
Solvent P-D-680 (Item 31, Appendix E)
Impermeable Gloves
Goggles
Cheesecloth (Item 7, Appendix E)
a.
Open
D r y c l e an
dangerous
door completely and secure in open position.
WARNING
ing solvent, P-D-680, used to clean parts is potentially
to personnel and property.
Avoid repeated and prolonged
s k i n c o n t a c t.
Wear solvent-impermeable gloves-and eye/face protec-
tive equipment when using solvent.
Do not use near open flame or
e x c e s s i v e h e a t.
Flash point of solvent is 100°F to 138° F (38°C
t o 5 9 ° C ) .
b. Remove defective gasket by prying gasket from door. Scrape traces of
gasket and adhesive from door. Wash with solvent P-D-680.
c.
Coat gasket area on door with adhesive.
d .
Firmly press new gasket onto door.
e .
Wipe excess adhesive from gasket.
f. Close door and wipe excess adhesive from door and frame.
g .
Allow adhesive to dry before using door.
1-94
