TM 5-6675-318-14
Table 3-22. TROUBLESHOOTING
NOTE
Each MALFUNCTION leads to one or more TEST OR INSPECTIONS. Each TEST
OR INSPECTION leads to CORRECTIVE ACTION.
Perform CORRECTIVE ACTION
necessary to correct failure.
If beyond scope of Operator CORRECTIVE
ACTION,
refer to higher level maintenance.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
PLOTTER IS TOTALLY INOPERATIVE. NO INDICATORS ARE LIT.
1.
Step 1.
Check to see if ac power plug is plugged into wall outlet.
(a) If power cord is plugged in proceed to step 2.
(b) Plug in power cord.
Step 2.
Check that electrical outlet is operable.
(a) If power is present at the receptacle, proceed to step 3.
(b) If no power is present, refer to organizational maintenance.
Step 3.
Visually check for blown fuse on plotter.
(a) Remove power cord from outlet.
(b) Remove fuse and correct by installing a new fuse. If problem
persists, refer to direct/general support maintenance.
3-217
