TM 5-6675-318-14
Table 3-13. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
PLOTTER IS TOTALLY INOPERATIVE. NO INDICATORS ARE LIT.
Check to see if ac power plug is plugged into wall outlet.
S t e p 1.
(a) If plotter is plugged in, proceed to step 2.
(b) Insert plug into grounded ac outlet.
Check that electrical outlet is operative.
Step 2.
(a) Insert plug into different outlet or reset circuit breaker.
(b)
If
malfunction
is
not
corrected,
proceed
to
step
3.
Visually check for blown fuses.
Step 3.
Insert new fuse.
COMPUTER DISPLAYS ERROR MESSAGE.
2.
PLOTTER STOPS.
Refer to Table 3-12, Plotter Operation and Program Errors.
Correct program or repeat key sequence correctly.
EVERYTHING ELSE IS INOPERATIVE.
3.
COOLING FAN RUNS.
Press LINE power switch to off (0) and then to on (I).
3-111
