TM 5-6675-317-14
Table 2-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. LAMPS DO NOT LIGHT.
Step 1.
Check that power switch is on.
(a) If power switch is on, proceed to step 2.
(b) Turn on power switch.
Step 2.
Check that power cord is plugged in.
(a) If power cord is plugged in, proceed to step 3.
(b) Plug in power cord.
Step 3.
Visually check fuse for broken filament.
(a) Replace fuse (paragraphs 2-10.1)
(b) If filament is not broken, refer to organi
nance.
2.
TABLE DOES NOT LOCK.
Check for loose tilt lock.
(a) If loose, tighten.
(b) If tight, refer to organizational maintenance.
zational mainte-
2-12
