TM 5-6675-316-14
Control or Indicator
Function
Optical Mount Rotation Lock
Locks inner ring to allow
mounted optics to be rotated
and locked.
Momentary Switch
Decouples electrical clutches
and permits rapid movement of
optical mount in X or Y
direction.
Stage Separation Knob
Moves left view stage to
permit access to center film
rollers.
Grid Intensity Control
Increases or decreases light
intensity for both right and
left light grids.
Main Power Switch
Controls power to table.
4-5. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES.
Before You Operate.
Always keep in mind the WARNINGS and CAUTIONS. Perform
your before (B) PMCS.
b. While You Operate.
Always keep in mind the WARNINGS and CAUTIONS. Perform
your during (D) PMCS.
c.
After You Operate.
Be sure to perform your after (A) PMCS.
d.
If Your Equipment Fails to Operate.
Troubleshoot with proper equipment.
Report any deficiencies using the proper forms. See DA Pam
4-5.1 PMCS Procedures.
PMCS are designed to keep the equipment in good worki
performing periodic service tasks.
738-750.
ng condi tion by
b. Service intervals provide you, the operator, with time schedules that
determine when to perform-specified service” tasks.
c.
The “Equipment is Not Ready/Available If” column is used for identification of
conditions that make the equipment not ready/available for readiness reporting
purposes or denies use of the equi
d.
If your equipment fails to
this condition to your supervisor,
4-10
pment until corrective maintenance is performed.
operate after PMCS is performed, immediately report
