TM5-6675-316-14
(b) If baselines continuously go lower with increasing point
size, correct this condition by loosening the lower lens
adjustment setscrew slightly and tighten the upper lens
adjustment setscrew.
Tighten lens lock screws.
g.
h.
Reinstall top center panel and top left panel.
Turn on circuit breaker, then turn on power switch.
i.
Perform diagnostic test.
j.
MOS: 35E, Special Electronic Devices Repairer
3/32 in. Hex Head Key Wrench
TOOLS :
5/32 in. Hex Head Key Wrench
7/64 in. Hex Head Key Wrench
WARNING
Death or serious injury may occur from electrical shock unless power is
secured before servicing.
Open top left panel.
a.
2-326
