TM 5-6675-316-14
WARNING
To prevent personnel injury, four persons are needed to move this equipment.
Composing machine weighs 485 lbs (220 kg).
k.
Lift composing machine from shock mounts and move to center of van.
Remove defective composing machine from section with materials handling
l.
equipment.
Position new composing machine over shock mounts and secure with shock
m.
mount center bolts.
n.
Remove left panel.
Reinstall cable assembly.
Reinstall and tighten conduit locknut.
o.
Reconnect cable leads.
Turn on power switch.
p.
Reinstall top left panel.
q.
Reinstall display screen and secure with washers and bolts.
r.
Turn on circuit breaker.
s.
2-17. PREPARATION FOR STORAGE OR SHIPMENT. Contact your battalion for packing
and shipping instructions.
Section V DIRECT/GENERAL SUPPORT MAINTENANCE
2-18. REPAIR PARTS, SPECIAL TOOLS; TEST, MEASUREMENT, AND DIAGNOSTIC EQUIP-
MENT (TMDE); AND SUPPORT EQUIPMENT.
2-18.1 Common Tools and Equipment. For authorized common tools and equipment,
refer to the Modified Table of Organization and Equipment (MTOE) applicable to your
unit.
2-18.2 Special Tools; Test, Measurement, and Diagnostic Equipment; and Support
Equipment. Special Tools, TMDE and Support Equipment required for the repair of
this equipment are found in the repair parts and special tools list and Appendix B
..
of this manual.
2-18.3 Repair Parts. Repair parts for this equipment are listed and illustrated in
the Repair Parts and Special Tools List, TM 5-6675-316-24P covering direct/general
support maintenance for this equipment.
