TM 5-6675-315-14
NOTE
When removing switch, be careful to retain spring-loaded spacer in place.
d.
Remove two screws, nuts, and washers which secure bale ejection switch and remove switch.
e.
Unscrew strain relief from switch.
f.
Using a flat tip screwdriver, snap off terminal cover from switch.
g.
Tag and disconnect wiring from defective switch.
h.
Reconnect wiring to new switch.
i.
Reinstall terminal cover.
j.
Screw strain relief into switch.
k.
Install new switch and secure with two screws, nuts, and washers.
1.
Reinstall cover.
m.
Turn on circuit breaker.
2-219
