TM 5-6675-315-14
d.
Remove two screws which secure the roller switch to its mounting bracket, and remove switch.
e.
Unscrew strain relief from switch.
f.
Using a flat tip screwdriver, snap off terminal cover from roller switch.
g.
Disconnect wiring from defective roller switch to be replaced.
h.
Reconnect wiring to new switch.
i.
Reinstall terminal cover on switch.
j.
Screw strain relief into switch.
k.
Install the new roller switch assembly in position and secure with two screws.
1.
Reinstall cover and secure with screws.
m.
Turn on circuit breaker.
2-214
