TM 5-6675-315-14
c.
Remove screws and upper left cover.
d.
Loosen clamp which secures switch to cutter motor and remove switch assembly.
e.
Remove screws which attach cover to switch and remove cover.
f.
Tag and disconnect wires from switch.
g.
Remove screws and defective switch.
h.
Connect wires to new switch.
i.
Install new switch on housing. Secure with screws.
j.
Reinstall cover on switch and secure with screws.
k.
Reinstall switch assembly on motor and tighten clamp.
l.
Reinstall cover and secure with screws.
2-209
