TM 5-6675-315-14
NOTE
When conveyor belt is tight enough to prevent movement by hand, it is properly adjusted.
d.
Loosen locking nut and turn adjusting screw until belt is tight and runs evenly on rollers.
e.
Reinstall covers and secure with screws.
2-35.2
Adjust Conveyor Drive Gears and Paddle.
MOS:
83FJ6, Reproduction Equipment Repairer
TOOLS:
5/16 in. Combination Wrench
4 mm Hex Head Key Wrench
24 mm Open End Wrench
5 mm Hex Head Key Wrench
WARNING
Death or serious injury may occur from electrical shock unless power is secured before
servicing.
a.
Turn off main power switch.
2-206
