TM 5-6675-315-14
2-20.6
Replace Pump Motor Assembly.
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL: Two persons are required to perform this procedure.
TOOLS:
5 mm Hex Head Key Wrench
6 mm Hex Head Key Wrench
6 in. Pipe Wrench
8 in. Adjustable Wrench
Torque Wrench
Flat Tip Screwdriver
SUPPLIES:
Pump Motor Assembly
Lubrication Oil (SAE 30) (Item 7, Appendix E)
Cheesecloth (Item 3, Appendix E)
Drain Pan
Funnel
WARNING
Death or serious injury may occur from electrical shock unless power is turned off before
replacing pump motor.
a.
Turn off circuit breaker.
b.
Turn off main power switch.
c.
Move shredder-bagger away from wall (paragraph 2-16.21).
d.
Remove feed table and panels, then drain hydraulic system.
e.
Remove bolts attaching motor to frame.
2-152
