TM 5-6675-315-14
Table 1-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND
SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM TO BE INSPECTED
For Readiness
IN
Reporting
ITEM
TER-
PROCEDURE
Equipment Is
NO.
VAL
Not Ready/
Available If:
VAN BODY - Cont
1
Inspect Exterior - Cont
WARNING
Electrical shock hazard. Power cable must
be de-energized before servicing entry
panel connections. Death can result from
failure to observe these safety precautions.
a
Turn power off to cable. Disconnect from
power source.
b
Disconnect ground lug from grounding rod.
c
Clean lug, cable end, and rod with wire brush.
d
Reconnect grounding cable lug to rod.
e
Disconnect grounding cable end from entry panel.
f
Clean terminal and cable end with wire brush.
g
Reconnect grounding cable to entry panel.
h
Reconnect cable to power source. Turn power on.
B
9.
Inspect boarding ladders for:
Steps broken
or will not
a
Secure attachment of handrails.
lock in
place.
b
Steps not broken.
c
Locking pins in place.
B/D/
10.
Inspect front and rear van body locks to be sure
Lock dis-
A
locks are fully engaged.
engaged.
1-17
