TM 5-6675-315-14
2-16.8
Replace V-Belts.
MOS:
83FJ6, Reproduction Equipment Repairer
TOOLS:
Flat Tip Screwdriver
No. 2 Cross Tip Screwdriver
8 in. Adjustable Wrench
1 mm Combination Wrench
SUPPLIES:
V-Belts
WARNING
Death or serious injury may occur from electrical shock unless power is turned off before
servicing.
a.
Turn off circuit breaker.
b.
Turn off main power switch.
c.
Remove screws attaching bottom of top right cutter mechanism side panel.
NOTE
Top of cutter side panel hangs unsecured from pair of brackets.
d.
Grasp cutter side panel at bottom and top. Remove cutter side panel by lifting straight up several inches and
then pulling away.
2-94
